Netgear FS728TLP Web Management User Guide - Page 189
The Destination IP Address Rules screen displays., The ACL Wizard screen displays.
View all Netgear FS728TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches The IP ACL screen displays. The following figure shows an entry in the table as an example. 2. In the IP ACL ID field in the heading of the IP ACL Table, specify an ID. Type an ID in the range from 100 to 199. An ID in this range creates an extended IP ACL. You cannot use a basic IP ACL, that is, an IP ACL with an ID in the range from 1 to 99. For more information about extended IP ACLs, see Manage IP ACL Identifiers on page 208. 3. Click the Add button. The ACL is added to the IP ACL table. No rules are attached yet to the ACL. 4. Select Security > ACL > ACL Wizard. The ACL Wizard screen displays. 5. Next to Select Devices Based on Destination IP Address, select one of the following active links: • Permit. Creates a rule that permits a destination IP address. • Deny. Creates a rule that prohibits a destination IP address. The Destination IP Address Rules screen displays. The following figure shows the Destination IP Address Rules screen with the Deny action selected. If you select the Permit action, the fields are the same, except that the CPU Notification Mode menu is masked out. Manage Access Control Lists 189