Netgear FS728TLP Web Management User Guide - Page 324

ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches Management Settings Table 14. Management settings Feature Sets Supported Default Setting Maximum number of simultaneous N/A 4 HTTP management sessions Management security 1 profile with 20 rules for HTTP or No profile name and no rules defined. SNMP access to allow or deny All IP addresses allowed. access to an IP address or subnet SNMPv1 and SNMPv2 5 communities Enabled default communities: • public, read-only • private, read/write Trap configurations 6 None configured Trap flag for authentication N/A Enabled Trap flag for link up/down N/A Enabled Trap flag for spanning tree N/A Enabled SNMP v3 1 user admin, read/write, enabled LLDP TLV advertised interval Global settings 30 seconds LLDP hold multiplier Global settings 4 seconds LLDP reinitializing delay Global settings 2 seconds LLDP transmit delay Global settings 5 seconds LLDP administrative status All ports Enabled for egress (Tx) and ingress (Rx) traffic. LLDP management IP address All ports Auto advertisement LLDP notification All ports Disabled LLDP optional TLVs All ports Disabled LLDP-MED fast start duration Global settings 3 times LLDP-MED All ports Disabled Factory Default Software Settings 324