Netgear FVS338 FVS338 Reference Manual - Page 124
Configuring the ProSafe VPN Client for ModeConfig, Pre-Shared Key
UPC - 606449037197
View all Netgear FVS338 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
FVS338 ProSafe VPN Firewall 50 Reference Manual Configuring the ProSafe VPN Client for ModeConfig From a client PC running NETGEAR ProSafe VPN Client software, configure the remote VPN client connection. To configure the client PC: 1. Right-click the VPN client icon in the Windows toolbar. In the upper left of the Policy Editor window, click the New Policy editor icon. a. Give the connection a descriptive name such as "modecfg_test" (this name will only be used internally). b. From the ID Type pull-down menu, select IP Subnet. c. Enter the IP Subnet and Mask of the VPN firewall (this is the LAN network IP address of the gateway). d. Check the Connect using radio button and select Secure Gateway Tunnel from the pull- down menu. e. From the ID Type pull-down menu, select Domain name and enter the FQDN of the VPN firewall; in this example it is "local_id.com". f. Select Gateway IP Address from the second pull-down menu and enter the WAN IP address of the VPN firewall; in this example it is "172.21.4.1". Figure 5-21 2. From the left side of the menu, click My Identity and enter the following information: a. Click Pre-Shared Key and enter the key you configured in the FVS338 IKE menu. 5-30 v1.0, March 2008 Virtual Private Networking