Netgear FVS338 FVS338 Reference Manual - Page 56
RIP Version, RIP-1, First Key Parameters, Second, Apply
UPC - 606449037197
View all Netgear FVS338 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
FVS338 ProSafe VPN Firewall 50 Reference Manual • None - the router neither broadcasts its route table nor does it accept any RIP packets from other routers. This effectively disables RIP. 4. Select the RIP Version from the pull-down menu: • RIP-1 - classful routing and does not include subnet information. This is the most commonly supported version. • RIP-2 - supports subnet information. Both RIP-2B and RIP-2M send the routing data in RIP-2 format: • RIP-2B - uses subnet broadcasting. • RIP-2M - uses multicasting (see Note below). 5. RIP authentication is disabled by default. To enable authentication for RIP-2B or RIP-2M, a. Check the Yes radio button. b. Input MD5 keys and effective and end dates for the First Key Parameters and Second Key Parameters for MD5 based authentication between routers. 6. Click Apply to save your settings. Note: Multicasting can reduce the load on non-router machines because they do not listen to the RIP multicast address and will not receive the RIP packets. However, if one router uses multicasting, then all routers on your network must use multicasting. For RIP-2B and RIP-2M you can select the type of authentication as NONE or MD5. If you select MD5 then you need to enter additional parameters. 3-14 v1.0, March 2008 LAN Configuration