Netgear FVS338 FVS338 Reference Manual - Page 50

Using the DHCP Server, Scanning the Network

Page 50 highlights

FVS338 ProSafe VPN Firewall 50 Reference Manual Figure 3-3 The Network Database is created by: • Using the DHCP Server: The router's DHCP server is configured, by default, to respond to DHCP requests from clients on the LAN. Every computer that receives a response from the router will be added to the Network Database. Because of this, leaving the DHCP Server feature enabled (on the LAN Setup screen) is strongly recommended. • Scanning the Network: The router also scans the local network periodically using protocols such as ARP and NetBIOS to detect active computers or devices that are not DHCP clients. For computers that do not support the NetBIOS protocol, the name will be displayed as Unknown. The Known PCs and Devices table lists the entries in the Network Database. For each computer or device, the following fields are displayed: 3-8 LAN Configuration v1.0, March 2008

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198

FVS338 ProSafe VPN Firewall 50 Reference Manual
3-8
LAN Configuration
v1.0, March 2008
The Network Database is created by:
Using the DHCP Server
: The router’s DHCP server is configured, by default, to respond to
DHCP requests from clients on the LAN. Every computer that receives a response from the
router will be added to the Network Database. Because of this, leaving the DHCP Server
feature enabled (on the LAN Setup screen) is strongly recommended.
Scanning the Network
: The router also scans the local network periodically using protocols
such as ARP and NetBIOS to detect active computers or devices that are not DHCP clients.
For computers that do not support the NetBIOS protocol, the name will be displayed as
Unknown.
The Known PCs and Devices table lists the entries in the Network Database. For each computer or
device, the following fields are displayed:
Figure 3-3