Netgear GS748TS GS7xxTS User Manual - Page 139
Bridge Multicast Filtering Status
UPC - 606449049480
View all Netgear GS748TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
GS700TS Smart Switch Software Administration Manual The Advanced IGMP Snooping Configuration screen contains the following fields: IGMP Snooping Configuration • Status - Select the IGMP Snooping status on the device. IGMP Snooping is operational if both the Status and Bridge Multicast Filtering fields are enabled. The possible field values are: - Disable - Disables IGMP Snooping on the device. This is the default value. - Enable - Enables IGMP Snooping on the device. • Bridge Multicast Filtering Status - Select the bridge Multicast filtering status on the device. The possible field values are: - Disables - Disables Multicast filtering on the device. If Multicast filtering is disabled, Multicast frames are flooded to all ports in the relevant VLAN. Disabled is the default value. - Enables - Enables Multicast filtering on the device. Interface Settings • VLAN ID - Displays the VLAN ID. • Status - Select the IGMP Snooping status on the VLAN. The possible field values are: - Enable - Enables IGMP Snooping on the VLAN. - Disable - Disables IGMP Snooping on the VLAN. • Auto Learn - Select the Auto Learn status on the device. If Auto Learn is enabled, the devices automatically learns where other Multicast groups are located. The possible field values are: - Enable - Enables auto learn. - Disable - Disables auto learn. • Host Timeout - Enter the amount of time in seconds the host waits to receive a message before timing out. The default value is 260 seconds. • MRouter Timeout - Enter the amount of the time in seconds the Multicast router waits to receive a message before it times out. The default value is 300 seconds. • Leave Timeout - Enter the amount of time in seconds the host waits, after requesting to leave the IGMP group and not receiving a Join message from another station, before timing out. If a Leave Timeout occurs, the switch notifies the Multicast device to stop sending traffic The field range is 0 - 2147483647. The default value is 10 seconds. Configuring Switching Settings v1.0, June 2009 4-46