Netgear GS748TS GS7xxTS User Manual - Page 227
Interface, Test Result, Cable Fault Distance, Last Update, Cable Length
UPC - 606449049480
View all Netgear GS748TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
GS700TS Smart Switch Software Administration Manual Figure 8-6 The Cable Test screen contains the following fields: • Interface - Enter the port to which the cable is connected. • Test Result - Displays the cable test results. Possible values are: - No Cable - Indicates a cable is not connected to the port. - Open Cable - Indicates a cable is connected on only one side. - Short Cable - Indicates a short has occurred in the cable. - OK - Indicates the cable passed the test. • Cable Fault Distance - Displays the distance from the port where the cable error occurred. • Last Update - Displays the last time the port was tested. • Test - Click TEST to perform the cable tests for the selected port. • Cable Length - Displays the approximate cable length. This test can only be performed when the port is up and operating at 100Mbps or 1 Gbps. 2. On the row containing the interface to be tested, click TEST to test the cable connected to the interface. Maintenance 8-8 v1.0, June 2009