Netgear GS748TS GS7xxTS User Manual - Page 56
Recipients IP, Notification Type, Community String, Notification Version, UDP Port, Timeout, Retries
UPC - 606449049480
View all Netgear GS748TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
GS700TS Smart Switch Software Administration Manual Figure 3-10 The SNMPv1/v2 Trap Configuration screen contains the following fields: • Recipients IP - Enter the IP address to which the traps are sent. • Notification Type - (Configurable only if the Notification Version is SNMPv2.) Select the type of notification sent. The possible field values are: - Traps - Indicates Traps are sent. - Informs - Informs are sent only when SNMPv2 is enabled. • Community String - Enter the community string of the trap manager. • Notification Version - Select the trap type. The possible field values are: - SNMPv1 - Indicates SNMP Version 1 traps are sent. - SNMPv2 - Indicates SNMP Version 2c traps are sent. • UDP Port - Enter the UDP port used to send notifications. The default UDP port is 162. • Timeout - Enter the amount of time (in seconds) the device waits before re-sending informs. The default is 15 seconds. • Retries - Enter the maximum amount of times the device re-sends an inform request if a response is not received. The default is 3 times. 2. Select the trap entry. 3. Enter the fields in the first row. 4. Click APPLY to update the device. 3-21 v1.0, June 2009 Managing System Settings