Netgear GS748TS GS7xxTS User Manual - Page 225

GS700TS Smart Switch Software Administration Manual 2. Select Firmware, Boot File or Configuration as the download File Type from the provided field. 3. Select whether to download via TFTP or via HTTP. 4. If you selected via HTTP, enter the file name in the provided box. 5. If you selected via TFTP, enter the TFTP Server IP address in the provided field. 6. If you selected via TFTP, enter the Remote Filename in the provided field. 7. Click APPLY to download the file. You must reboot the device for the downloaded file settings to take effect. See "Device Reboot" for detailed instructions on rebooting the device. File Management The File Management menu contains the following option: • "Active Image" Active Image The Active Image screen enables the user to select which image will be set as active after the next reset. The Active Image file for each unit in a stacking configuration can be individually selected. To define the active image: 1. Click Maintenance > File Management > Active Image. The Active Image screen displays: Figure 8-5 The Active Image screen contains the following fields: • Unit No. - Displays the unit number for which the Image file is selected. Maintenance 8-6 v1.0, June 2009