Netgear GS748TS GS7xxTS User Manual - Page 153
CoS Interface Configuration
UPC - 606449049480
View all Netgear GS748TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
GS700TS Smart Switch Software Administration Manual • Trust Mode - Select which packet fields to use for classifying packets entering the device. The possible Trust Mode field values are: - CoS - Classifies traffic based on the CoS (VPT) tag value. - DSCP - Classifies traffic based on the DSCP tag value. 2. Select Enable or Disable in the QoS Status field. 3. Select the QoS Mode and Trust Mode in the provided fields. 4. Click APPLY to update the device. CoS Interface Configuration The CoS Interface Configuration screen contains information for configuring the default CoS value on a selected interface. After CoS has been configured, the device's original CoS default settings can be reassigned to the interface in the CoS Interface Configuration screen. To configure CoS interface parameters: 1. Click QoS > CoS > Basic > CoS Interface Configuration. The CoS Interface Configuration screen displays: Figure 5-2 Configuring QoS 5-4 v1.0, June 2009