Oki MC770 MC770/780 User Guide - Advanced - Page 111

2 Press [TWIN COLOR SELECTABLE]. IMAGE ADJUSTMENT 5 Press or of the color to obtain the desired color balance. 1 3 Select a color for the parts other than black in the original. 1) Press [SECOND COLOR]. 2) Select the desired color. 2 After completing the adjustment, press [OK]. This is the end of the setting. If you want to adjust each color balance on every density area, press [DETAIL] and go to the next step. 6 Press or of the color on each density area to obtain the desired color 3 balance. 4 4 Select a color for the black part in the original. 1) Press [CHANGE BLACK TO]. 2) Select the desired color. After selecting the color, press [OK]. This is the end of the setting. If you want to adjust the color balance, press [ADJUST] and go to the next step. Note • When the two colors specified are the combination of black and a color other than black, color balance adjustment is enabled. When neither of the two colors is black, or when both of them are black, this adjustment is disabled. • The color balance of a color other than black can be adjusted. For example, when you adjust the high density area of 5 magenta (M) to the side, the magenta in its high density area becomes darker. After completing the adjustment, press [OK]. Canceling color balance adjustment • Move the indicator of the color whose adjustment you want to cancel to the middle, and then press [OK]. 6 • If you want to cancel the adjustment of all colors, press [RESET], and then [OK]. 7 - 111 -