Oki MC770 MC770/780 User Guide - Advanced - Page 97

5 Select either [COPIED] or [BLANK]. EDITING FUNCTIONS 1 6 Select the page where the insertion sheets will be inserted. 1) Select the type of the insertion sheets ([INSERT SOURCE 1] or [INSERT SOURCE 2]). 2) Key in page numbers (1 to 1000) where the insertion sheets will be inserted, and then press [SET]. Repeat steps 1) and 2) if you want to insert sheets at more than one page. 3) Press [OK] after you have keyed in the page numbers. 2 8 Select other copy modes as required, and then press the [START] button on the control panel. When the originals are placed on the RADF, scanning and copying start. When they are placed on the original glass, follow steps 9 and 10. 3 9 Place the next original, and then press [NEXT COPY] on the touch panel or the [START] button on the control panel. Scanning of the next original starts. Repeat this procedure until the scanning of all the originals is finished. 10 When the scanning of all the originals is finished, press [JOB FINISH] on the touch 4 panel. Copying starts. 5 Memo • If you selected [COPIED] in step 5, the selected page will be replaced with a copied insertion sheet. If you selected [BLANK], a blank insertion sheet will be inserted before the selected page. • Up to 50 pages in total can be selected for [INSERT SOURCE 1] and [INSERT SOURCE 2]. 6 7 Press the [BASIC] tab to display the BASIC menu. Then select the tray in which normal paper is placed (not the one for sheet insertion). You must place the normal paper of the same size and direction as that for the insertion sheets in advance. 7 - 97 -