Oki MC770 MC770/780 User Guide - Advanced - Page 302

SETTING ITEMS (ADMIN) Selecting WEP security mode The WEP is a data encryption method using the WEP key 1 between the Access Point and other wireless devices. 1 Press [WEP] and press [NEXT]. 3 Select the transmit power and press [NEXT]. 2 The WIRELESS ENCRYPTION - WEP screen is displayed. 2 3 Enter the following items and press [NEXT]. Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not have to limit the area, select [100%]. 4 Confirm the settings and press [FINISH]. 4 • WEP ENCRYPTION Select the bit length of the WEP key. 5 • KEY FORMAT Select the character code for the WEP key. • WEP KEY Press this to enter the WEP key. The maximum length of WEP key varies depending on the WEP Encryption and Key Entry Method. 64 bit 128 bit 152 bit HEX: 10 26 32 6 ASCII: 5 13 16 Memo • When pressing WEP KEY button, the letter entry screen is displayed. Enter the value using the keyboard and digital keys, and press [OK] to set the entry. 7 Memo • If you want to change the settings, press [PREV] to move back to the screen that you want to change and then repeat the operation. 5 Press [YES], and wait until the setting is reflected. Selecting no security mode You can also set no security for wireless access. Note • If you do not set no security, anyone knows how the SSID can connect to the wireless network. Therefore, it is recommended to set the security if it is possible. - 302 -