Oki MC770 MC770/780 User Guide - Advanced - Page 151

ORIGINAL MODE Set the scanning mode based on the type of the original. TEXT: This is suitable for an original with text and line drawings. TEXT/PHOTO: This is suitable for an original with a mixture of text and photos. PHOTO: This is suitable for an original with photos. Memo • In the TEXT/PHOTO mode or PHOTO mode, transmission time may be longer than in the TEXT mode. TX TYPE Set the fax transmission mode. MEMORY TX: Send the original after the scanned data are saved in the memory. Up to 100 transmissions of up to 1000 pages per 1 transmission can be reserved. DIRECT TX: Send the original directly as it is being scanned. Once a page has been scanned and sent, the next page is scanned and sent. Therefore, it takes longer to scan and send all pages. However, you can confirm on the fly that each page is sent to the recipient. SECURE RECEIVE FORCED SETTING You can enable or disable the SECURE RECEIVE function. This is available only when the WEEKLY SCHEDULE function is set. ENABLE: This enables the SECURE RECEIVE function. Memo • It becomes disabled at the time set by WEEKLY SCHEDULE. DISABLE: This disables the SECURE RECEIVE function. Memo • It becomes enabled at the time set by WEEKLY SCHEDULE. • An administrator password is required. EXPOSURE Set the density at which the original is to be scanned. AUTO: This equipment automatically detects the contrast of the original, and scans it with the optimum contrast. MANUAL: Press or contrast. to set the desired SETTING ITEMS TTI Switch the TTI recording ON or OFF. To enable this feature, the Terminal ID must be registered to this equipment in advance. 1 P.152 "Registering the terminal ID" Memo • Setting this item may not be required since it may not be displayed on the screen (it depends on your country or region). RTI 2 Switch the RTI recording ON or OFF. To enable this feature, the Terminal ID must be registered to this equipment in advance. P.152 "Registering the terminal ID" ECM Switch the ECM (Error Correction Mode) communication ON or OFF. ECM is an internationally standardized communication 3 mode that automatically corrects errors that occur during fax transmissions. With this setting option ON, even when the transmitted data have been affected by noise during communication, this mode allows good communication without image distortion by automatically resending the part that have been affected. Memo 4 • Both the sender and the receiver must have the ECM function to make ECM communication available. • When affected by noise during communication, communication time is slightly longer than usual. Even when the ECM communication is used, an error may occur depending on the line status. • The ECM communication is not available for voice communication. 5 PREVIEW SETTING Switch the preview setting ON or OFF. INITIAL PREVIEW TYPE Set the preview type to be displayed as an initial 6 7 - 151 -