Oki MC770 MC770/780 User Guide - Advanced - Page 296

SETTING ITEMS (ADMIN) 2 Press [PEAP] and press [NEXT]. 1 2 The WIRELESS AUTHENTICATION (PEAP) screen is displayed. 3 Enter the following items and press [NEXT]. 3 [TKIP] - Select this to use TKIP encryption. TKIP provides a different key for per packet with a message integrity check. This key will be changed for every fixed interval. [AES(CCMP)] - Select this to use AES encryption. AES is the next-generation cryptography algorithm that the U.S. government improves to replace the DES and 3DES. [DYNAMIC WEP] - Select this to use an encryption which automatically updates the WEP key. DYNAMIC WEP does so periodically as well as automatically. Note • To select [TKIP] or [AES (CCMP)], press [WPA] or [WPA2], or to select [DYNAMIC WEP], press [802.1X]. Memo • The encryption intensity between each encryption is: AES(CCMP) > TKIP > DYNAMIC WEP 5 Specify the following items and press [NEXT]. 4 • [EAP USER NAME] Press this to enter the EAP user name that is used for the authentication. • [EAP PASSWORD] Press this to enter the EAP password that is used for the authentication. 5 • [RETYPE PASS] Press this to enter the EAP password again that you enter in the EAP PASSWORD field. Memo • When pressing each button, the letter entry screen is displayed. Enter the value using the keyboard and digital keys, and press [OK] to set the entry. 4 6 Specify the following items and press [NEXT]. • TRANSMIT POWER Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not have to limit the area, select [100%]. 6 Confirm the settings and press [FINISH]. 7 • ENCRYPTION BETWEEN AP AND STA. Select the encryption type that is used for the communication between Access Point and this equipment. Memo • If you want to change the settings, press [PREV] to move back to the screen that you want to change and then repeat the operation. - 296 -