Oki MC770 MC770/780 User Guide - Advanced - Page 273
Setting the IPv6 protocol automatically in a, Confirm the settings and press [OK].
View all Oki MC770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 273 highlights
3 Confirm the settings and press . SETTING ITEMS (ADMIN) Setting the IPv6 protocol automatically (in a stateful network environment) 1 On the IPv6 screen, specify the following items as required and press . 1 Memo • The IPv6 addresses acquired from routers are displayed. Up to seven IPv6 addresses can be retained. Note • When this equipment receives a router advertisement (RA) from a router with the M flag set to "0", the DHCPv6 function is disabled. When the router advertisement (RA) M flag setting is changed from "0" to "1" with the router settings, reboot this equipment by using the [POWER] button on the control panel to enable the DHCPv6 function. 4 Confirm the settings and press [OK]. You will be returned to the NETWORK menu. Memo • The IPv6 address acquired from the DHCPv6 server is displayed. 2 Item name Description 3 IPv6 PROTOCOL • ENABLE - Press this button to enable the IPv6 protocol. • DISABLE - Press this button to disable the IPv6 protocol. LLMNR • ENABLE - Press [ENABLE] to enable the LLMNR (Linklocal Multicast Name Resolution) protocol. 4 • DISABLE - Press [DISABLE] to disable the LLMNR protocol. ADDRESS MODE Select [STATEFUL] for the IPv6 addressing mode. Link Local Address The unique address used in IPv6 is displayed. 5 Note • The link-local address cannot be used to connect to network places across a router. • [ENABLE] and [DISABLE] for the LLMNR protocol are available when you select [ENABLE] for the IPv6 protocol. 6 7 - 273 -