Oki MC770 MC770/780 User Guide - Advanced - Page 33
Basic Guide, Inner Finisher 1 Tray
View all Oki MC770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Note • To register a custom paper size, either A (Length) or B (Width) should differ by more than 0.3 inches (7 mm) from the standard paper size. If not, the created custom paper size is considered as the standard paper size. • You cannot create a custom paper size with A (Length) longer than B (Width). If you want to print such a document, do so by selecting [landscape] for the [Orientation]. • There are some precautions when you use paper larger than the standard sizes. For details, see the following page: P.53 "Printing on paper larger than standard sizes" 4) Name Enter the custom paper size name. You can enter up to 63 characters. This name will be displayed in the [Original Paper Size] and [Print Paper Size] box on the [Basic] tab. 5) Paper Size Enter A (Length) and B (Width) to specify the paper size. Note • Select values within the range shown on the right of each. 6) Units Select the unit for the paper size. The default unit varies depending on the regional setting in the Windows. [Device Settings] tab The [Device Settings] tab allows you to configure options. When any optional unit is installed in this equipment, set the configuration of the machine on this tab. The [Device Settings] tab can be displayed only from the Printers folder (and not when displaying the properties from the application's print dialog box). Note • In order to set the [Device Settings] tab, you must access the printer driver properties from the [Devices and Printers] folder. For detailed instructions on how to set the [Device Settings] tab, see the following guide: Basic Guide 1 2 3 4 8 5 6 9 7 1) Model Selection This sets the model type. PRINTING FROM WINDOWS Note 1 • If you select [Universal], you can narrow down the setup items of the printer driver to those used commonly in all of the entire MFP. It is convenient in such cases as when you are using a printer driver already installed to other models. 2) Option This option sets whether the following optional devices are installed. 2 Trays This sets the installation of trays according to the configuration. - Tray 1 - Select this when only Tray 1 is installed. - Tray 1 & Tray 2 - Select this when Trays 1 and 2 are installed. - Tray 1, 2 & Tray 3 - Select this when Trays 1, 2 and 3 are installed. 3 - Tray 1, 2 & Tray 3, 4 - Select this when Trays 1, 2, 3 and 4 are installed. 3) Finisher This sets whether or not the Finisher is installed. - None - Select this when a Finisher is not installed. - Inner Finisher (1 Tray) - Select this when a Finisher is installed. 4 4) [Tray Setings] Click this to set the paper size and paper type of each tray. The [Tray Setings] dialog box appears by clicking this. 5) [Account Settings] Click this button to set whether the user management setting is enabled or not. You can also set whether the Private Print Restriction function and Hold Print Restriction 5 function are enabled or not. The [Account Settings] dialog box appears upon clicking this button. P.34 "Account Settings" 6) [Customization] This sets options specific to PCL6 or PostScript, or changes the Plug-in settings or the printer driver language. When you click this, the [Customization] dialog box appears. 6 P.35 "Customization: [Plug-in] tab" P.36 "Customization: [Language] tab" P.36 "Customization: [PDL Settings] tab" Note • The Printer Language setting is available only for the printer drivers below. 7 - PCL - PS3 7) [Version Information] Click this to display the [Version Information] dialog box. 8) Device Settings Retrieval This enables SNMP communication between this equipment and your computer to retrieve the option configuration information. - 33 -