Oki MC770 MC770/780 User Guide - Advanced - Page 215

6 Press the button for the desired template. To switch the menu Press or . Templates with the automatic start function enabled can be identified with . If this mark is displayed, you can press it to immediately start the operation of the functions set in the template. 7 Key in the password for the selected template. (If no password is set, go to step 8.) 1) Press [PASSWORD] and then enter the password with the buttons on the touch panel or the digital keys on the control panel. 2) Press [OK]. TEMPLATES 9 Select other copy modes as required, and then press the [START] button on the control panel. 1 Changing Data You can change the data of templates or private groups that are already registered, such as the template name, user name, password and setting of the automatic start function. Note 2 • The data of the public template group can be changed from the TopAccess menu but this cannot be done from the control panel. For how to change them from the TopAccess menu, refer to the TopAccess Guide. Changing private group data 1 In the template menu, select the desired group. 3 1) Press the [REGISTRATION] tab. 2) Select the desired group by pressing its button or keying in its group number (3 digits). 3) Press [EDIT]. 4 8 Confirm that "Updated the template setting" is displayed on the touch panel. The message is displayed for approx. 3 seconds. 5 To switch the menu Press or . 2 Key in the password for the selected group. (If no password is set, go to step 3.) 1) Press [PASSWORD] and then enter the password 6 with the buttons on the touch panel or the digital keys on the control panel. 2) Press [OK]. 7 - 215 -