Oki MC770 MC770/780 User Guide - Advanced - Page 16

PRINTING FROM WINDOWS  [Basic] tab The [Basic] tab contains basic print operation settings, such as the original paper size, print paper size, paper source, paper 1 type, destination, number of copies, orientation, and so on. 1 2 3 2 4 5 6 7 8 3 9 Memo • There are also 40 custom paper sizes in the [Print Paper Size] box. You can set the custom paper sizes in the [Others] tab. 3) Image Scale Select this check box to enter the scale manually to enlarge or reduce an image. The ratio can be set at between 25 and 400%. Memo • For detailed instructions on how to print with the [Image Scale] setting, see the following page:  P.44 "Fitting images within paper size" 4) Paper Source This selects a paper source to print a job in the most suitable paper size. The figure on the right indicates the paper size set for each paper source. When you select a paper source, the chosen one is indicated with a green square in the figure. 1) Original Paper Size This selects the size of a document to be printed. 4 Available original paper sizes are listed below: • A4 (210 x 297 mm) • Executive • A5 (148 x 210 mm) (7 1/4 x 10 1/2") • B5 (182 x 257 • Env-Com10 • Folio (210 x 330 mm) (4 1/8 x 9 1/2") • A6 (105 x 148mm) • Env-Com9 • Postcard (3 7/8 x 8 7/8") 5 • Letter (8 1/2 x 11") • Legal (8 1/2 x 14") • Env-Monarch (3 7/8 x 7 1/2") • Statement • Envelope DL (5 1/2 x 8 1/2") (110 x 220 mm) • 13"LG (8 1/2 x 13") • Envelope Cho-3 • 8.5"SQ (8 1/2 x 8 1/2") (120 x 235 mm) • 16K (195 x 270 mm) • Envelope You-4 • 13.5"LG (8 1/2 x 13.5") (105 x 235 mm) • IndexCard (3 x 5") • Envelope-C5 6 (162 x 229mm) Note • There are also 40 custom paper sizes in the [Original Paper Size] box. You can set the custom paper sizes in the [Others] tab.  P.29 "[Others] tab" 7 • The default paper size will be [Letter] or [A4] according to the regional setting in the Windows. 2) Print Paper Size Select this to enlarge or reduce a page image to fit exactly in the selected paper size. If you do not wish to enable enlarge or reduce printing, select [Same as Original Size]. Note • When you use the custom paper size, you need to select manually the custom paper size in a tray in advance. Memo • Youj can select a paper source by directly clicking on the figure on the right. - Auto - Automatically selects the paper set in this equipment according to the printed document size. - Tray 1 - Paper is fed from the 1st Tray. - Tray 2 - Paper is fed from the 2nd Tray. - Tray 3 - Paper is fed from the 3rd Tray. - Tray 4 - Paper is fed from the 4th Tray. - MPT - Paper is fed from the multi-purpose tray (MPT). When this is selected and print a job, [JOB STATUS] on the touch panel will blink. Press [JOB STATUS] and check the paper size of the job. Then set the paper and press the [START] button to print a job. Note • The selectable values vary depending on the optional devices installed in this equipment and their configuration on the [Device Settings] tab. • When paper such as special that needs to be fed from the multi-purpose tray is set, [MPT] may be automatically selected in the [Paper Source] box, and then a confirmation dialog box may appear. • When the paper size settings on the [Device Settings] tab differ from those in the equipment, the paper source setting is ignored and the equipment may prompt to set the paper in the multi-purpose tray. 5) Paper Type This sets the media type of the paper. - Plain (Thin) - Select this when printing on plain thin paper. - Plain - Select this when printing on plain paper. - Thick1 - Select this when printing on thick 1 paper. - Thick2 - Select this when printing on thick 2 paper. - Thick3 - Select this when printing on thick 3 paper. - Thick4 - Select this when printing on thick 4 paper. - Thick5 - Select this when printing on thick 5 paper. - Special 1 - Select this when printing on special 1 paper. - 16 -