Pioneer AVH-4100NEX Owner's Manual - Page 11

p A USB cable is required for connection. Plugging in a USB storage device Plug a USB storage device into the USB cable. 2 Touch the language that you want to use on screen. 3 Touch the following key. Displays the "Smartphone Setup" screen. 1 4 Press the button. The LCD panel closes. Ejecting an SD memory card 1 Press the button. 2 Touch the following key. 4 Touch the item you want to set. For details, refer to Information on the connections and functions for each device on page 21. 5 Touch the following key. Displays the Top menu screen. Opens the LCD panel. 3 Press the middle of the SD memory card gently until it clicks. The SD memory card is ejected. 4 Pull the SD memory card out straight. 5 Press the button. The LCD panel closes. ■■Connecting and disconnecting an iPod Connecting your iPod For details, refer to Connecting an iPhone with Lightning connector on page 76. For details, refer to Connecting an iPhone with 30-pin connector on page 76. Disconnecting your iPod Pull out the cables after confirming that no data is being accessed. ■■Plugging and unplugging a USB storage device p This product may not achieve optimum performance with some USB storage devices. p Connection via a USB hub is not possible. 2 1 USB cable 2 USB storage device Unplugging a USB storage device Pull out the USB storage device after checking that no data is being accessed. Startup and termination 1 Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds. 2 Turn off the vehicle engine to terminate the system. This product is also turned off. On first-time startup When you use this product for the first time, select the language that you want to use. 1 Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds. The "Select Program Language" screen appears. If you touch , the display returns to the previous screen. Regular startup Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds. p The screen shown will differ depending on the previous conditions. p Enter the password for the anti-theft function if the password entry screen appears. Turning off the display You can turn off the display at night or when the screen is too bright. ■■When the Application screen is available Press and hold the MODE button. The display turns off. p If you touch the screen when the display is off, it reverts to the original screen. ■■When the Application screen is not available Press the MODE button. The display turns off. p If you touch the screen when the display is off, it reverts to the original screen. English Chapter 02 11 En