Pioneer AVH-4100NEX Owner's Manual - Page 56
Touch [Back Camera: Reverse
View all Pioneer AVH-4100NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Chapter 23 Camera: Displays the image output by the con- nected external camera. p If "Camera" is selected, "2nd Camera Input" is automatically set to "On". p If "Off" or "Source" is selected, "2nd Camera Input" is automatically set to "Off". Setting the rear view camera The following two functions are available. A separately sold rear view camera (e.g. ND-BC6) is required for utilizing the rear view camera function. (For details, consult your dealer.) Rear view camera This product features a function that automatically switches to the full-screen image of the rear view camera installed on your vehicle. When the shift lever is in the REVERSE (R) position, the screen automatically switches to full-screen rear view camera image. p If the shift lever is aligned to the REVERSE (R) position immediately after the system of this product is started up, only the camera image will be displayed and the parking assist guidelines will not be displayed. The parking assist guidelines will be displayed on the camera image after a little while. Be sure to check the conditions around the vehicle even before the guidelines and the message are displayed. Camera for Camera View mode Camera View can be displayed at all times (e.g. when monitoring an attached trailer, etc.). Please note that with this setting, the camera image is not resized to fit, and that a portion of what is seen by the camera is not viewable. CAUTION Check to make sure settings for rear view camera displays a mirror reversed image. p Immediately verify whether the dis- play changes to a rear view camera image when the shift lever is aligned to REVERSE (R) from another position. 56 En p When the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting in "Reverse Gear Setting". ■■Setting rear view camera activation To view images of the rear view camera on the screen of this product, "Back Camera Input" needs to be set to "On". 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [Camera settings]. 4 Touch [Back Camera Input] repeatedly until the desired setting appears. Off (default): Turns the back camera input setting off. On: Turns the back camera input setting on. ■■Setting the polarity of the rear view camera 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [Camera settings]. 4 Touch [Reverse Gear Setting] repeatedly until the desired setting appears. Battery (default): When the polarity of the connected lead is positive while the shift lever is in the REVERSE (R) position. Ground: When the polarity of the connected lead is negative while the shift lever is in the REVERSE (R) position. When the shift lever is aligned to the REVERSE (R) position after setting the rear view camera, the rear view image appears. ■■Setting the reversed image display for the rear view image Rear view camera images are displayed reversed (as mirror images) on the front screen except when a rear view camera that can output images in the correct direction is used. You can set whether to reverse the rear view camera images to be displayed on the front screen. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. p This function is available only when "Back Camera Input" is "On". For details, refer to Setting rear view camera activation on page 56. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [Camera settings]. 4 Touch [Back Camera: Reverse Video] repeatedly until the desired setting appears. Off (default): Does not reverse the rear view camera images. On: Reverses the rear view camera images. Setting the camera for Camera View mode To display Camera View at all times, "Camera View" needs to be set to "On". p To set the rear view camera for Camera View mode, "Back Camera Input" needs to be set to "On". For details, refer to Setting rear view camera activation on page 56. p To set the second camera for Camera View mode, set "AV Input" to "Camera" or set "2nd Camera Input" to "On". For details, refer to Setting AV input on page 55. For details, refer to Setting the second camera input on page 57. p You can also turn this function on by touching [Camera View] on the AV source selection screen or in the source list. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [Camera settings]. 4 Touch [Camera View] repeatedly until the desired setting appears. Off (default): Turns the camera view setting off. On: Turns the camera view setting on. If no operations are performed for seven seconds after the AV operation screen is displayed, the camera view will appear automatically. p If you touch the screen while the camera view is displayed, the displayed image will turn off temporarily. When the camera view of both rear view camera and second camera are available, the key to switch the display appears.