Pioneer AVH-4100NEX Owner's Manual - Page 53

p Touch anywhere on the LCD screen to display the touch panel keys again. 6 Displays the Phone menu screen. For details, refer to Displaying the phone menu on page 16. 7 Changes the wide screen mode. For details, refer to Changing the wide screen mode on page 71. Reading the screen 1 1 Current time and date Starting procedure 1 Display the AV source selection screen. For details of the operations, refer to Displaying the AV operation screen on page 12. 2 Touch [HDMI] on the AV source selection screen. The image is displayed on the screen. 3 Use the touch panel keys on the screen to control the external unit. For details, refer to Using the touch panel keys on page 52. Using an AUX source You can display the video image output by the device connected to this product. This section describes operations for an AUX source. p A Mini-jack AV cable (CD-RM10) (sold separately) is required for connection. For details, refer to Connecting the external video component on page 78. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, you must stop in a safe place and apply the parking brake. Using the touch panel keys 1 23 4 5 6 87 1 Displays the source list. For details, refer to Selecting a front source on the source list on page 13. 2 Displays the Time and date setting screen. For details, refer to Setting the time and date on page 70. 3 Displays the Setting menu screen. 4 Recalls equalizer curves. For details, refer to Using the equalizer on page 64. 5 Hides the touch panel keys. Touching this area hides the touch panel keys. p Touch anywhere on the LCD screen to display the touch panel keys again. 6 Displays the Phone menu screen. For details, refer to Displaying the phone menu on page 16. 7 Switches the operation screen. For details, refer to Switching the operation screen on page 53. 8 Changes the wide screen mode. For details, refer to Changing the wide screen mode on page 71. Reading the screen 1 1 Current time and date Starting procedure You can display the video image output by the device connected to video input. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [Input/Output Settings]. 4 Confirm that "AUX Input" is turned on. p The default setting is "On". 5 Display the AV source selection screen. For details of the operations, refer to Displaying the AV operation screen on page 12. 6 Touch [AUX] on the AV source selection screen. The image is displayed on the screen. 7 Use the touch panel keys on the screen to control the external unit. For details, refer to Using the touch panel keys on page 53. Chapter Setting the video signal 20 When you connect this product to an AUX equipment, select the suitable video signal setting. p You can operate this function only for the video signal input into the AUX input. English 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "Video Setup" screen appears. 3 Touch [Video Signal Setting]. 4 Touch [AUX]. The pop-up menu appears. 5 Touch the item you want to set. Auto (default): Adjusts the video signal setting automatically. PAL: Sets the video signal to PAL. NTSC: Sets the video signal to NTSC. PAL-M: Sets the video signal to PAL-M. PAL-N: Sets the video signal to PAL-N. SECAM: Sets the video signal to SECAM. Switching the operation screen You can switch between the screen to operate music files and that to operate video files. Touch the following key. Switches between the screen to operate video files and that to operate music files. 53 En