Pioneer AVH-4100NEX Owner's Manual - Page 39

8 Touch [OK]. p If you want to adjust the setting again from the beginning, touch [RESET]. ■■Displaying the image of your application (iPhone with 30-pin connector) You can set an image of an application for iPhone, which is not compatible with AppRadio Mode, to be shown on the screen. p Depending on the type of application, you may not be able to see the image on the screen. p You can only control the application on the connected device. p When you touch the display in this function, "Don't Touch" mark appears on the upper right corner of the screen. 1 Connect your iPhone. For details, refer to Connecting an iPhone with 30-pin connector on page 76. 2 Press the HOME button to display the Top menu screen. 3 Touch [APPS]. A message, which notifies you that your iPhone can launch the application, appears on the screen. A message, which asks you whether you want to launch your application, appears on your iPhone. 4 Use your iPhone to refuse to launch the application. 5 Touch [OK] on the screen of this product. The black screen appears. 6 Launch an application on your iPhone. An image of the application appears on the screen. 7 Press the HOME button to return to the Top menu screen. ■■Displaying the image of your application (iPhone with Lightning connector) You can set an image of an application for smartphone, which is not compatible with AppRadio Mode, to be shown on the screen. p Depending on the type of application, you may not be able to see the image on the screen. p When you use this function, do not connect other devices via Bluetooth wireless technology. Be sure to disconnect your Bluetooth device before using this function. p You can only control the application on the connected device. p When you touch the display in this function, "Don't Touch" mark appears on the upper right corner of the screen. 1 Connect your iPhone. p The cable connection method varies depending on your device. For details, refer to Connecting an iPhone with Lightning connector on page 76. 2 Press the HOME button to display the Top menu screen. 3 Touch [APPS]. The image in your iPhone appears on the screen. 4 Launch an application on your iPhone. An image of the application appears on the screen. 5 Press the HOME button to return to the Top menu screen. ■■Displaying the image of your application (smartphone) You can set an image of an application for smartphone, which is not compatible with AppRadio Mode, to be shown on the screen. p Compatibility with all smartphones is not guaranteed. p When you use this function, do not con- nect other devices via Bluetooth wireless technology. Be sure to disconnect your Bluetooth device before using this function. p You can only control the application on the connected device. p When you touch the display in this function, "Don't Touch" mark appears on the upper right corner of the screen. 1 Connect your smartphone to this product via the separately sold App Connectivity Kit (CD-AH200). p The cable connection method varies depending on your device. For details, refer to Connecting the Android™ device on page 77. 2 Press the HOME button to display the Top menu screen. 3 Touch [APPS]. The image in your smartphone appears on the screen. 4 Launch an application on your smartphone. An image of the application appears on the screen. 5 Press the HOME button to return to the Top menu screen. Using Android Auto You can control applications for a smartphone directly from the screen (Android Auto). In Android Auto, you can operate applications with finger gestures such as tapping, dragging, scrolling or flicking on the screen of this product. p Android Auto may not be available in your country or region. For details about Android Auto, please refer to the Google support site: http://support.google.com/androidauto p This function is available for the Android Auto-compatible device only. p The compatible finger gestures vary depending on the application for a smartphone. To use Android Auto, set "Mode" in "Smartphone Setup" to "Android Auto" beforehand. For details, refer to Setting the device connection method on page 20. Chapter Content and functionality of compatible applications are the responsibility of the 13 App providers. In Android Auto, usage is limited while English driving, with availability of functions and content determined by the App providers. Android Auto allows access to applica- tions other than those listed, subject to limitations while driving. PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION. ■■Starting procedure When connecting an Android Autocompatible device to this product, you must select the method for connecting your device. Settings are required according to the connected device. For details, refer to Chapter 5. p To achieve optimum usability of Android Auto, set the driving position setting correctly according to the vehicle. For details, refer to Setting the driving position on page 40. 1 Connect an Android Autocompatible device to this product via the separately sold USB interface cable for use with Android devices (CD-MU200). For details, refer to Connecting the Android or MirrorLink™ device on page 77. 2 Press the HOME button to display the Top menu screen. 3 Touch [Android Auto]. The Bluetooth connection with the Android Auto-compatible device will automatically be established. p If Android Auto is turned on during a call on a cellular phone other than the Android Auto-compatible device, the Bluetooth connection will be terminated after the call ends. 39 En