Pioneer AVH-4100NEX Owner's Manual - Page 58
Touch [Beep Tone] repeatedly until
![]() |
View all Pioneer AVH-4100NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 23 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [Camera settings]. 4 Touch [2nd Camera: Reverse video] repeatedly until the desired setting appears. Off (default): Does not reverse the second camera images. On: Reverses the second camera images. Turning off the demo screen If the demo screen appears, perform the following procedure to turn off the demo screen. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [Demo Mode] repeatedly until the desired setting appears. On (default): Displays the demo screen. Off: Hides the demo screen. You can also turn off the demo screen by pressing and holding the MUTE button. Selecting the system language The system language can be selected. 58 En The language can be changed for the following: - The "Audio" screen - The "System" screen - The "Video Setup" screen - The "Bluetooth" screen - Language for messages Some operations on this product are prohibited from use while driving or require careful attention when operated. In such cases, a caution message will appear on the display. You can change the language for caution messages with this setting. If the embedded language and the selected language setting are not the same, text information may not display properly. Some characters may not be displayed properly. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [System Language]. The pop-up menu appears. 4 Touch the desired language. After the language is selected, the previous screen returns. Setting the keyboard language with the application for iPhone You can use the keyboard in AppRadio Mode by setting the language of the keyboard for iPhone. p This function is only available in AppRadio Mode on the iPhone. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [Keyboard]. The "Keyboard" screen appears. 4 Touch the desired language. After the language is selected, the previous screen returns. Setting the beep sound 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [Beep Tone] repeatedly until the desired setting appears. On (default): Sounds a beep. Off: Does not sound a beep. Adjusting the response positions of the touch panel (touch panel calibration) If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel screen. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. p Do not use sharp pointed tools such as a ballpoint or mechanical pen, which could damage the screen. p Do not turn off the engine while saving the adjusted position data. The "System" screen appears. 3 Touch [Touch Panel Calibration]. The touch panel adjustment screen appears. 4 Touch two corners of the screen along the arrows, and then touch the centers of two + marks at the same time twice. 5 Press the HOME button. The adjustment results are saved. 6 Press the HOME button once again. Proceed to 16-point adjustment. If you press and hold the HOME button, the adjustment is canceled. 7 Gently touch the center of the + mark displayed on the screen. The target indicates the order. After you touch all marks, the adjusted position data is saved. If you press the HOME button, the previous adjustment position returns. If you press and hold the HOME button, the adjustment is canceled. 8 Press and hold the HOME button. The adjustment results are saved. Setting the dimmer function You can specify the timing that the dimmer function is to be turned on. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears.
![](/manual_guide/products/pioneer-avh4100nex-owners-manual-483267a/58.png)