Pioneer AVH-4100NEX Owner's Manual - Page 60
Audio adjustments
View all Pioneer AVH-4100NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Chapter 24 - MIXTRAX, images output from the external device - Rear view camera Displaying the firmware version 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. 3 Turn the source off. For details, refer to Turning off the AV source on page 13. 4 Press the HOME button to display the Top menu screen. 5 Touch the following keys in the following order. The "System" screen appears. 3 Touch [System Information]. 4 Touch [Firmware Information]. The "Firmware Information" screen appears. p You can check the open source licenses of the functions that this product is equipped with under "License" on the "Firmware Information" screen. Updating firmware CAUTION Never turn this product off, eject the SD memory card or disconnect the USB storage device while the firmware is being updated. You can only update the firmware when the vehicle is stopped and the parking brake is engaged. p Use the USB port1 to update the firmware using a USB storage device. 1 Download the firmware update files. 2 Connect a blank (formatted) SD memory card or USB storage device to your computer, and then locate the correct update file and copy it onto the SD memory card or USB storage device. 60 En The "System" screen appears. 6 Touch [System Information]. 7 Touch [Firmware Update]. The "Firmware Update" screen appears. 8 Touch [Continue] to display the data transfer mode. p Follow the on-screen instructions to finish updating the firmware. p This product will reset automatically after the firmware update is completed if the update is successful. p When the firmware update starts, the source is turned off and the Bluetooth connection is disconnected. p If an error message appears on the screen, touch [Continue] to proceed and start the recovery sequence. Checking the connections of leads Check that the leads are properly connected between this product and vehicle. Also check whether they are connected in the correct positions. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. The "System" screen appears. 3 Touch [System Information]. 4 Touch [Connection Status]. The "Connection Status" screen appears. Illumination When the headlights or small lamps of the vehicle are on, "ON" is displayed. When the small lamps of the vehicle are off, "OFF" is displayed. (If the orange/ white lead is not connected, "OFF" appears.) iDatalink When the optional iDatalink adapter is connected and the protocol version matches, "OK" is displayed. If the version does not match, "Unsupported Version" is displayed. If the optional iDatalink adapter is not connected, "NOK" is displayed. Audio adjustments Using fader/balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. p This function is available only when main audio is available. p This function is available only when "Rear Speaker" is set to "On". For details, refer to Adjusting the front and rear speaker output on page 62. 1 Press the HOME button to display the Top menu screen. 2 Touch the following keys in the following order. 4 Touch the following keys to adjust the front/rear speaker balance. Moves towards the front. Moves towards the rear. Each time you touch the keys, the front/rear speaker balance moves towards the front or rear. p "Front25" to "Rear25" is displayed as the front/rear speaker balance moves from the front to rear. p The default setting is "F/R 0 L/R 0". p Set "Front" and "Rear" to "0" when using a dual speaker system. 5 Touch the following keys to adjust the left/right speaker balance. Moves towards the left. Moves towards the right. Each time you touch the keys, the left/right speaker balance moves towards the left or right. p "Left25" to "Right25" is displayed as the left/right speaker balance moves from the left to right. p The default setting is "L/R 0". p You can also set the fader/balance by dragging the point on the displayed table. The "Audio" screen appears. 3 Touch [Fader/Balance]. The "Fader/Balance" screen appears. Using balance adjustment You can adjust the balance between right/ left sound output. p This function is available only when main audio is available. p This function is available only when "Rear Speaker" is set to "Off". For details, refer to Adjusting the front and rear speaker output on page 62.