Ricoh Aficio SP 5210SR Copy Reference - Page 62
Combined Copying, One-Sided Combine
View all Ricoh Aficio SP 5210SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
2. Basic Copying Combined Copying This section describes how to make combined copies. • When placing originals on the exposure glass, start with the first page to be copied. When placing 2 originals in the ADF, set the first page on top. • When placing originals on the exposure glass or in the ADF using the Batch function, press the [ ] key after all the originals have been scanned. • If you selected [2 Sided] for Original or [Combine 2 Sides] for Copy, you can change the orientation. See "Originals and Copy Orientation". • You can change the initial settings for 1-Sided Combine or 2-Sided Combine under Edit in User Tools. For details, see "Edit". • In this mode, the machine selects the reproduction ratio automatically. This reproduction ratio depends on copy paper sizes and the number of originals. • The machine selects reproduction ratios of between 25 and 400%. However, if the originals are placed in the ADF, the maximum reproduction ratio is 200%. To copy originals at reproduction ratio above 200%, you must place them on the exposure glass. • If the calculated ratio is under the minimum ratio, it is automatically adjusted to within available range. However, with some ratios, parts of the image might not be copied. • Depending on the orientation of the original and copy paper, the machine will automatically rotate the image by 90 degrees to make copies properly. • If the number of originals placed is less than the number specified for combining, the last page segment is left blank as shown. BZH165 • p.59 "Originals and Copy Orientation" • p.183 "Edit" One-Sided Combine Combine several pages onto one side of a sheet. 60