Ricoh SP C250DN Operating Instructions - Page 116
IPv6 Configuration Tab, Network Application Tab, IPv6 Address, Network Print Setting
View all Ricoh SP C250DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
5. Configuring the Machine Using Web Image Monitor IPv6 Configuration Tab IPv6 Item IPv6 Description Select whether to enable or disable IPv6. You cannot disable IPv6 using Web Image Monitor if the machine is currently in use in an IPv6 environment. In this case, use the control panel to disable [IPv6] under network settings. When disabled, [DHCP], [Manual Configuration Address], [Prefix Length], and [Gateway Address] below cannot be configured. IPv6 Address Item DHCP IP Address (DHCP) Stateless Address Gateway Address Link-local Address Manual Configuration Address Prefix Length Gateway Address Description Select whether or not the machine obtains its IPv6 address from a DHCP server. Displays the IPv6 address obtained from the DHCP server when [DHCP] is set to [Active]. Displays up to four stateless auto addresses. Displays the machine's default gateway address. Displays the link local address of the machine. The link local address is an address that is valid only inside the local network (local segment). Enter the machine's IPv6 address. Can contain up to 39 characters. Enter the prefix length, using a value between 0 and 128. Enter the default gateway's IPv6 address. Can contain up to 39 characters. Network Application Tab Network Print Setting Item Description IPP Select to enable network printing using Internet Print Protocol (via TCP port 631/80). 114