Ricoh SP C250DN Operating Instructions - Page 90

4. Configuring the Machine Using the Control Panel Maintenance Menu This section explains about parameters that can be set on the Maintenance menu. Color Dens/Reg Adjusts color density and registration automatically. TonerAlmstEmpty Specifies the low toner level notification timing. Default: [Normal] • Normal Low toner level notification will be made when the number of pages that can be printed with the remaining toner is approximately 200. • Notify Later Low toner level notification will be made when the number of pages that can be printed with the remaining toner is approximately 100. • Notify Sooner Low toner level notification will be made when the number of pages that can be printed with the remaining toner is approximately 300. Anti-Humid Lvl You can set the printer to produce prints in consistent quality even when humidity is high. Default: [Off] • Off • Level 1 Select this mode if printouts are blurred. • Level 2 Select this mode if printouts are curled and/or blurred. Note that if you select this mode, the first print takes longer than subsequent prints. • Level 3 Select this mode if printouts are still curled and/or blurred even when prints are made in [Level 2]. Note that this mode requires more time to produce the first print than [Level 2]. 88