Ricoh SP C250DN Operating Instructions - Page 185
Enabling and Disabling IPsec Using the Control Panel, Click [Finish].
View all Ricoh SP C250DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Transmission Using IPsec 34. In the Session key settings, select "Generate a new key every", and enter the same validity period (in [Seconds] or [Kbytes]) as that specified for [Life Time] on the machine. 35. Click [OK], and then click [Next]. 36. Click [Finish]. If you are using IPv6 under Windows Vista or a newer version of Windows, you must repeat this procedure from Step 12 and specify ICMPv6 as an exception. When you reach Step 22, select [58] as the protocol number for the "Other" target protocol type, and then set [Negotiate security] to [Permit]. 37. Select the filter action that you have just created, and then click [Next]. 38. Select one of options for an authentication method, and then click [Next]. 39. Click [Finish], and then click [OK] twice. The new IP security policy (IPsec settings) is specified. 40. Select the security policy that you have just created, right click on it, and then click [Assign]. IPsec settings on the computer are enabled. • To disable the computer's IPsec settings, select the security policy, right click, and then click [Unassign]. Enabling and Disabling IPsec Using the Control Panel 1. Press the [Menu] key. 2. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key. 3. Press the [ ] or [ ] key to select [Network Setting], and then press the [OK] key. 4. Press the [ ] or [ ] key to select [IPsec], and then press the [OK] key. 5. Press the [ ] or [ ] key to select [Active] or [Inactive], and then press the [OK] key. 6. Press the [Menu] key to return to the initial screen. 183