Samsung SCH U520 User Manual (ENGLISH) - Page 117

Voice Settings Adapt Digits To adapt digit dialing, do the following: 1. In standby mode, press the Menu (left) soft key ( ), then press (for Voice SVC), (for Voice Settings), and for Digit Dialing. The following options appear in the display: • Adapt Digits • Reset Digits 2. Use the navigation keys to highlight Adapt Digits, then press the OK key. Your phone displays text describing the Adapt Digits process. 3. Press the OK key. Your phone displays the first digit sequence and "Please say" plays through the speaker followed by the four digits appearing in the display. 4. Wait for the beep and say the digits using your normal tone of voice. After a moment, the phone plays back the recording and prompts "Did the recording sound ok?" • If the recording was good, say "Yes." • If you need to re-record, say "No." If you say "No," the phone prompts you to pronounce the digits again. Wait for the beep and then say the digits. Repeat this step until you're satisfied with the recording. 5. After confirming that the recording sounds "ok", continue the recording process with the next set of digits. 6. After 10 sets of digits, the phone asks whether you want to do more adaptation. Answer "Yes." 7. Repeat steps 4 and 5 for another 10 sets of digits. After the second group of 10 sets of digits, "Adaptation complete" plays through the speaker and you are returned to the Digit Dialing menu. Reset Digits To reset digit dialing to factory default settings, do the following: 1. In standby mode, press the Menu (left) soft key ( (for Voice SVC), (for Voice Settings), and The following options appear in the display: • Adapt Digits • Reset Digits ), then press for Digit Dialing. Voice SVC 117