Samsung SCH U520 User Manual (ENGLISH) - Page 153

Phone Settings Important! DO NOT depend on this phone as a primary method of calling 911 or for essential or emergency calls. Remember to always turn your phone on and check for adequate signal strength before placing a call. Note: When you dial an emergency number, you phone locks itself to the emergency location that answered the call and locks itself in 911-Only mode, blocking from dialing any number but an emergency number. Store Emergency Numbers 1. In standby mode, press the Menu (left) soft key ( (for Settings), (for Phone Settings), and The "Enter Code" prompt appears in the display. 2. Enter the four-digit lock code using the keypad. ), then press for Security. Note: The default lock code is the last four digits of your mobile phone number. The "Enter Code" prompt disappears and the Security menu appears in the display. 3. Press for Emergency #. 4. Press , @ )) , or to select one of the three emergency numbers. 5. Enter the emergency number (up to 32 digits in length). 6. Press OK to save the number that you entered. 7. Press Cancel (right) soft key ( the previous menu. ) to discard your entry and return to Call Emergency Numbers in Lock Mode 1. In standby mode, enter the emergency number via the keypad. 2. Press SEND to place the call. Reset Phone Reset Phone returns all setup parameters (except for the phonebook entries) to their factory default values. Caution! Before selecting Reset Phone, contact your Wireless Carrier. Invoking Reset Phone may erase settings made by your Wireless Carrier from your phone, resulting in loss of service. 1. In standby mode, press the Menu (left) soft key ( ), then press (for Settings), (for Phone Settings), and for Security. Settings 153