Samsung SL-K7600LX User Guide - Page 365

Using the BLE/NFC feature (Optional) If you want to add BLE/NFC feature to the machine, check the option lists and contact the purchasing point to order (see "Available accessories" on page 215). After installing the Wireless Kit (Wireless LAN Option), set the machine to use this feature. 19 Requirements • NFC, Bluetooth and Wi-Fi Direct enabled, supported mobile apps installed mobile device with Android 4.0 or higher(Android 4.3 or higher for BLE) The BLE (Bluetooth Low Energy) and NFC (Near Field Communication) printer allows you to directly print/scan/fax from your mobile device just by holding your mobile device over the NFC tag on BLE/NFC Kit (Wireless LAN Option). It does not require installing print driver or connecting to an access point. You just need NFC supported mobile device. In order to use this feature, mobile apps needs to be installed on your mobile device. • Depending on the material of the mobile device cover, NFC recognition may not work properly. • Depending on the mobile device you are using, the transmission speed may differ. • This feature is available only for the model with a NFC tag (see "Machine overview" on page 20). • Using a cover or a battery other than the ones that came with the mobile device, or a metal cover/sticker can block NFC. • If NFC devices keep failing to communicate, -Remove the case or cover from the mobile device, then try again. -Reinstall the battery from the mobile device, then try again. Only Android OS 4.1 or higher will automatically enable the Wi-Fi Direct feature on your mobile device when you enable the NFC feature. We recommend you to upgrade your mobile device to Android OS 4.1 or higher to use the NFC feature. • Wi-Fi Direct feature enabled printer (see "Setting the Wi-Fi Direct for mobile printing" on page 362). 3. Network Setup 365