Samsung SL-K7600LX User Guide - Page 65
Transparency, Labels
View all Samsung SL-K7600LX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Printing on special media 8 Transparency To avoid damaging the machine, use only transparencies designed for use in laser printers. • In case of color printing using transparencies, the picture quality would be lower than mono printing when the printouts are used on the overhead projector. • Transparencies used in the machine must be able to withstand the machine's fusing temperature. • Place them on a flat surface after removing them from the machine. • Do not leave unused transparencies in the paper tray for long periods of time. Dust and dirt may accumulate on them, resulting in spotty printing. • To avoid smudging caused by fingerprints, handle them carefully. • To avoid fading, do not expose printed transparencies to prolonged sunlight. • Ensure that transparencies are not wrinkled, curled, or have any torn edges. • Do not use transparencies that separates from the backing sheet. • To prevent transparencies from sticking to each other, do not let the printed sheets stack up as they are begin printed out. • Recommended media: Transparency for a color laser printer by Xerox, such as 3R 91331(A4), 3R 2780(Letter). • Prints made on transparency film with this printer are not compatible with overhead projectors and may appear as a black and white image if projected. 9 Labels Load the paper with the side to be printed on facing down. To avoid damaging the machine, use only labels designed for use in laser machines. • When selecting labels, consider the following factors: - Adhesives: The adhesive material should be stable at your machine's fusing temperature of about 170°C (338 °F) for 0.1 second. 2. Media and Tray 65