Sony SNCEP520 User Manual (SNC-ER/EP User Guide) - Page 54
Dynamic IP address notification Tab - Notifying the IP Address, OK/Cancel, e-Mail SMTP notification
View all Sony SNCEP520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Administrating the Camera Tip To attain QoS of data traffic, the target device must be connected to a router or switch that supports the QoS function. OK/Cancel See "Buttons common to every menu" on page 35. Dynamic IP address notification Tab - Notifying the IP Address When Obtain an IP address automatically (DHCP) is selected in the Network tab, you can send notification of completion of the network settings using the SMTP or HTTP protocol. e-Mail (SMTP) notification Select On to send an e-mail when the DHCP setting is completed. SMTP server name Type the name or IP address of the SMTP server for sending an e-mail, using up to 64 characters. SMTP port number Enter a port number from 25 to 65535. The standard port number is 25. If TLS is enabled, the standard port number for SMTPs is 465. Use TLS To use the encryption function by TLS, set to On. Note The model on sale in China does not support the TLS function. STARTTLS To use the encryption function by STARTTLS, set to On. Note The model on sale in China does not support the STARTTLS function. Authentication Select the authentication required when you send an e-mail. Off: Select if no authentication is required when an e-mail is sent. On: Select if authentication is required when an e-mail is sent. Select one of the authentication methods from the following and specify the POP server name, User name and Password as required. SMTP: Select when SMTP authentication is required. POP before SMTP: Select when POP before SMTP authentication is required. Note When you set Authentication to On, make sure to select either or both SMTP or/and POP before SMTP. POP mode Select POP3 or APOP as the authentication method for POP authentication. Note The model on sale in China does not support the APOP authentication. Wait time after POP Set the waiting time in POP before SMTP before SMTP authentication after POP authentication is completed. Timeout can be set from 0 to 10,000 msec. POP server name It is necessary when POP before SMTP is selected for Authentication. Type the POP (receiving mail) server name, using up to 64 characters. Or type the IP address of the POP server. This setting is necessary when the SMTP server that sends e-mails performs authentication using the POP user account. POP port number Enter a port number from 110 to 65535. The standard port number is 110. If TLS is enabled, the standard port number for POP3s is 995. 54 Configuring the Network - Network Menu