Home » Sony Manuals » Security Cameras » Sony SNCEP520 » Manual Viewer

Sony SNCEP520 User Manual (SNC-ER/EP User Guide) - Page 63

CA certificate Tab, Setting the 802.1X authentication function - Example of Windows Server 2003

Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Administrating the Camera Reset To change the private key password, click this button. The current password is cleared and the password text box is actived to allow new password entry. Note Click Cancel at the bottom of the menu if you want to cancel changing the private key password after clicking Reset. Doing so restores the other setting items in the Client certificate tab to their previous settings. OK/Cancel See "Buttons common to every menu" on page 35. CA certificate Tab You can import a trusted CA certificate (server certificate or route certificate) to the camera. Up to four certificates from trusted CAs can be imported to the camera. Only the PEM format is supported. To import the CA certificate Click Browse... to select the CA certificate to be imported. Then click Submit, and the selected file will be imported to the camera. Note Import process becomes invalid if the selected file is not a CA certificate. To display the information of the CA certificate When the CA certificate has been saved in the camera correctly, its information appears on Issuer DN, Subject DN, Validity Period and Extended Key Usage. To delete the CA certificate Click Delete, and the CA certificate stored in the camera will be deleted. Setting the 802.1X authentication function - Example of Windows Server 2003 This section explains how to configure the authentication server and CA using Microsoft Windows Server 2003. Note As this section describes authentication based on the user interface in English on Windows Server 2003, the UI terminology and page configuration may be different depending on the version of the Operating System or Service Pack and patch update status. Before setting Perform the following settings before configuring an 802.1X network. Active Directory (domain controller) The following setting example is based on the assumption that the Active Directory has been configured. Windows IAS configuration Configure Remote access/VPN server in Manage Your Server of Windows Server 2003. Open Add or Remove Programs from Control Panel of Windows menu. Install Internet Authentication Service in Add/ Remove Windows Components. CA configuration To configure the CA, perform the following steps: 1 Open Add or Remove Programs from Control Panel of the Windows menu. 2 Select Add/Remove Windows Components. 3 Add Certificate Services in the Component menu. 4 Select Enterprise root CA on CA Type. 5 Type the CA name on Common Name for this CA, and configure the CA. 63 Using the 802.1X Authentication Function - 802.1X Menu

Section	Page
Table of Contents	2
Overview	4
Features	4
How to Use This User’s Guide	5
System Requirements	6
Preparation	7
Assigning the IP Address to the Camera	7
Assigning an IP address using SNC toolbox	7
When using Windows XP Service Pack 2 or later	9
When using Windows Vista	11
When using Windows 7	14
Accessing the Camera Using the Web Browser	16
Basic Configuration by the Administrator	19
Operating the Camera	20
Administrator and User	20
Logging in to System	21
Logging in as a user	21
About Viewers	21
Configuration of Main Viewer	22
Main menu	22
Control panel section	22
Monitor image	25
Plug-in free viewer	25
Operating the Camera	26
Controlling via the control panel (Operation common to Area zoom mode and Vector dragging mode)	26
Panning and tilting by clicking the monitor image (Area zoom mode only)	27
Panning, tilting and zooming by specifying the area (Area zoom mode only)	27
Panning and tilting by dragging the screen (Vector dragging mode only)	27
Moving the camera to a preset position (Common operations in Area zoom and Vector dragging modes)	28
Using pan/tilt/zoom operations with the displayed control bar (PTZ Control bar only)	28
Controlling the Camera on a Panorama Image	28
Facing the camera toward a specified point	28
Using the Trigger Button	29
Sending a monitor image via e-mail	29
Sending a monitor image to an FTP server	29
Recording a camera image as a still image	29
Controlling alarm output 1	30
Controlling the Day/Night function	30
Playing an audio file stored in the camera	30
Switching Transmission Mode	30
Using the System Utility	31
SNC viewer	31
SNC desktop viewer	33
Administrating the Camera	35
Basic Operations of the Administrator Menu	35
How to set up the Administrator menu	35
Configuration of the Administrator menu	36
Configuring the System - System Menu	37
System Tab	37
Date & time Tab	38
Superimpose Tab	39
Installation Tab	40
Initialize Tab	41
System log Tab	43
Access log Tab	43
Setting the Camera Image and Audio - Camera Menu	43
Common Tab	43
Picture Tab	44
Privacy Masking tab	46
Day/Night Tab	48
Video codec Tab	48
Streaming Tab	50
Configuring the Network - Network Menu	51
Network Tab	51
QoS Tab	52
Dynamic IP address notification Tab - Notifying the IP Address	54
Setting the SSL function - SSL Menu	56
SSL tab	56
CA certificate tab - Adding the CA certificate for client authentication	58
How to install the CA certificate	58
To remove an installed CA certificate	60
Using the 802.1X Authentication Function - 802.1X Menu	61
System configuration of 802.1X network	61
Common Tab - Basic setting of 802.1X authentication function	61
Client certificate Tab	62
CA certificate Tab	63
Setting the 802.1X authentication function - Example of Windows Server 2003	63
Setting the User - User Menu	66
Setting the Security - Security Menu	67
Saving the Camera Position and Action - Preset position Menu	68
Position Tab - Saving pan/tilt/ zoom position	68
Position Tour Tab - Setting a position tour	69
Sending an Image via E-mail - e-Mail (SMTP) Menu	70
Common Tab - Setting the e-Mail (SMTP) Function	70
Alarm sending Tab - Setting the e-mail sending mode when detecting the alarm	72
Periodical sending Tab - Setting the periodical e-mail sending mode	73
Abnormal sending tab - Setting the abnormal e-mail sending mode	73
Sending Images to FTP Server - FTP client Menu	74
Common Tab - Setting the FTP client function	74
Alarm sending Tab - Setting the FTP client action when detecting the alarm	74
Periodical sending Tab - Setting the periodical FTP client activity	75
Recording Images in Memory - Image memory Menu	77
Common Tab - Setting the image memory function	77
Alarm recording Tab - Setting the Image memory function when detecting the alarm	78
Periodical recording Tab - Setting the periodical recording mode	79
Folder structure of Image memory	80
Downloading Images from the Camera - FTP server Menu	81
Setting the Edge Storage - Edge Storage Menu	81
Folder structure of Edge Storage	83
Setting the Alarm Output - Alarm output Menu	83
Alarm output 1 Tab	83
Outputting Audio Linked to Alarm Detection - Voice alert Menu	84
Voice alert 1, 2, 3 Tab	84
Setting the Operations from the Viewer - Trigger Menu	85
Setting the Schedule - Schedule Menu	87
Setting the Alarm Buffer - Alarm buffer Menu	88
Setting the Sensor input/ Camera tampering detection/Motion detection - Event detection menu	88
Sensor input tab - Set the sensor input	88
Camera tampering detection tab - Set the camera tampering detection	89
Motion detection tab - Set the motion detection	89
Setting items for motion detection	89
Configuring the Viewer - Viewer Menu	91
Layout tab	91
HTML output tab	94
Others	95
Using the SNC toolbox	95
Starting SNC toolbox	95
How to use SNC toolbox	95
Registering in My device	97
Changing the Device list display method	98
Setting SNC toolbox options	99
Using Privacy Masking - Masking a Camera Image	100
Using Panorama Creator - Creating a Panorama Image	102
Using the Custom Homepage - Setting the customized homepage	103
Using the Firmware Upgrade	104
Using the Schedule Task	104
Configuring the device setting	106
Device restart and initialization	108
Using the SNC audio upload tool - Transmitting Audio to Camera	108
Installing the SNC audio upload tool	109
Connecting the Camera to the Computer	109
Using the SNC audio upload tool	110
Using the SNC video player - Playing a Video/ Audio File Recorded with the Camera	114
Installing the SNC video player	114
Using the SNC video player	115
Using the SNMP	116
1. Inquiry Commands	116
2. Setting Commands	116
Glossary	117

Match case Limit results 1 per page

Administrating the Camera

Using the 802.1X Authentication Function — 802.1X Menu

Reset

To change the private key password, click this button.

The current password is cleared and the password text

box is actived to allow new password entry.

Note

Click

at the bottom of the menu if you want to

cancel changing the private key password after clicking

Reset

. Doing so restores the other setting items in the

Client certificate tab to their previous settings.

OK/Cancel

See “Buttons common to every menu” on page 35.

CA certificate Tab

You can import a trusted CA certificate (server

certificate or route certificate) to the camera. Up to four

certificates from trusted CAs can be imported to the

camera. Only the PEM format is supported.

To import the CA certificate

Click

Browse…

to select the CA certificate to be

imported.

Then click

Submit

, and the selected file will be

imported to the camera.

Note

Import process becomes invalid if the selected file is not

a CA certificate.

To display the information of the CA certificate

When the CA certificate has been saved in the camera

correctly, its information appears on

Issuer DN

Subject DN

Validity Period

and

Extended Key

Usage

To delete the CA certificate

Click

Delete

, and the CA certificate stored in the camera

will be deleted.

Setting the 802.1X authentication

function – Example of Windows

Server 2003

This section explains how to configure the

authentication server and CA using Microsoft Windows

Server 2003.

Note

As this section describes authentication based on the

user interface in English on Windows Server 2003, the

UI terminology and page configuration may be different

depending on the version of the Operating System or

Service Pack and patch update status.

Before setting

Perform the following settings before configuring an

802.1X network.

Active Directory (domain controller)

The following setting example is based on the

assumption that the Active Directory has been

configured.

Windows IAS configuration

Configure

Remote access/VPN server

Manage

Your Server

of Windows Server 2003. Open

Add or

Remove Programs

from

Control Panel

of Windows

menu. Install

Internet Authentication Service

Add/

Remove Windows Components

CA configuration

To configure the CA, perform the following steps:

Open

Add or Remove Programs

from

Control

Panel

of the Windows menu.

Select

Add/Remove Windows Components

Add

Certificate Services

in the Component menu.

Select

Enterprise root CA

CA Type

Type the CA name on

Common Name for this CA

and configure the CA.

Cancel