Sony SNCEP520 User Manual (SNC-ER/EP User Guide) - Page 71
STARTTLS, Authentication, Recipient e-mail address, Administrator e-mail address, Subject, Message
View all Sony SNCEP520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Administrating the Camera Note The model on sale in China does not support the TLS function. STARTTLS To use the encryption function by STARTTLS, select On. Note The model on sale in China does not support the STARTTLS function. Authentication Select whether authentication is required when you send an e-mail. Off: No authentication is required when an e-mail is sent. On: Authentication is required when an e-mail is sent. Select one of the authentication methods from the following and specify the POP server name, User name and Password as required. SMTP: Select when SMTP authentication is required. POP before SMTP: Select when POP before SMTP authentication is required. Note When you set Authentication to On, be sure to select either or both SMTP or/and POP before SMTP. POP mode Select POP3 or APOP as the authentication method for POP authentication. Note The model on sale in China does not support the APOP authentication. Wait time after POP Set the waiting time in POP before SMTP before SMTP authentication after POP authentication is completed. Timeout can be set from 0 to 10,000 msec. POP server name This is necessary when POP before SMTP is selected for Authentication. Type the POP (receiving mail) server name using up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server that sends e-mails performs authentication using the POP user account. POP port number Enter a port number from 110 to 65535. The standard port number is 110. If TLS is enabled, the standard port number for POP3s is 995. Authentication mode Select Login or CRAM-MD5 as the authentication method for SMTP authentication. Note The model on sale in China does not support the CRAMMD5 authentication. User name, Password Type the user name and password of the user who owns the mail account using up to 64 characters. This setting is necessary when the SMTP server that sends e-mails performs authentication. Recipient e-mail address Type the recipient e-mail address using up to 64 characters. Administrator e-mail address Type the Administrator e-mail address using up to 64 characters. This address is used for reply e-mails and sending system messages from the mail server. Subject Type the subject/title of the e-mail using up to 64 characters. When Alarm sending of the Alarm sending tab is set to On, an e-mail sent in response to alarm detection will indicate the type of alarm in the subject. (S1) is indicated for sensor input 1 detection, (S2) for sensor input 2 detection, (TP) for camera interference detection and (MD) for motion detection. Message Type the text of the e-mail using up to 384 characters. (A line break is equivalent to 2 characters.) OK/Cancel See "Buttons common to every menu" on page 35. 71 Sending an Image via E-mail - e-Mail (SMTP) Menu