Sony SNCEP520 User Manual (SNC-ER/EP User Guide) - Page 79
Periodical recording Tab - Setting the periodical recording mode, Suffix, Alarm, Effective period
View all Sony SNCEP520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Administrating the Camera Suffix Select a suffix to be added to the file name. Date & time: The Date & time suffix is added to the image file name. The Date & time suffix consists of the year (2 digits), month (2 digits), date (2 digits), hour (2 digits), minute (2 digits), second (2 digits) and sequential number (2 digits), thus adding a 14-digit number to the image file name. Sequence number: A sequential number of 10 digits between 0000000001 and 4294967295 and an sequential 2 - digit number is added to the image file name. Tip A sequential number added to Date & time and Sequence number is used to identify individual files created with consecutive alarm events. Sequence number clear Click Clear to reset the Sequence number suffix to 1. Alarm Select the alarm to be linked with the recording of image and audio files. Sensor input 1: The external sensor that is connected to sensor input 1 of the camera I/O port. Sensor input 2: The external sensor that is connected to sensor input 2 of the camera I/O port. Tampering: An alarm that is triggered when the camera detects tampering, such as direction shift or spraying. Motion detection: The alarm by the motion detection function. Click Detection, and the Motion detection menu is displayed to allow you to set the motion detection function (page 88). Note In the case that the synchronized preset position is specified in Position at alarm in the Preset position menu, the alarm event that happens when the camera moves to the preset position will be invalid. Effective period Set the period during which alarm detection is effective. Always: Alarm detection is always effective. Schedule: You can specify the period during which alarm detection is effective. Click Schedule to display the setting menu for the effective period. ("Setting the Schedule - Schedule Menu" on page 87) Alarm buffer Select Use alarm buffer when you record the image/ audio at a specific time before or after alarm detection (pre-alarm, post-alarm). If you do not select the alarm buffer, only the image at the moment of alarm detection is recorded. Click Alarm buffer to display the Alarm buffer menu. For details, see "Setting the Alarm Buffer - Alarm buffer Menu" on page 88. OK/Cancel See "Buttons common to every menu" on page 35. Periodical recording Tab - Setting the periodical recording mode You can set to record an image file (JPEG file) in the built-in memory or SD memory card periodically. Periodical recording Select On when you want to use periodical recording. Image file name Type the file name of the image to be recorded to the memory using up to 10 alphanumeric characters, (hyphen) and _ (under score). The actual image file name will be the specified image file name with a suffix and the extension .jpg. Note You cannot record an audio file using the periodical recording function. Suffix Select a suffix to be added to the file name. None: The recording file name will be the image file name. Date & time: The date & time suffix is added to the image file name. The Date & time suffix consists of the year (2 digits), month (2 digits), date (2 digits), hour (2 digits), minute (2 digits), second (2 digits) and sequential number (2 digits), thus adding a 14-digit number to the image file name. 79 Recording Images in Memory - Image memory Menu