ZyXEL NBG2105 User Guide - Page 59
Tutorials - driver
View all ZyXEL NBG2105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
CHAPTER 8 Tutorials 8.1 Overview This chapter provides tutorials for setting up your NBG2105. • Set Up a Wireless Network with WPS • Configure Wireless Security without WPS 8.2 Set Up a Wireless Network with WPS This section gives you an example of how to set up wireless network using WPS. This example uses the NBG2105 as the AP and NWD210N as the wireless client which connects to a notebook. Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter or PCI card). There are two WPS methods for creating a secure connection. This tutorial shows you how to do both. • Push Button Configuration (PBC) - create a secure wireless network simply by pressing a button. See Section 8.2.1 on page 59.This is the easier method. • PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal Identification Number) in the NBG2105's interface. See Section 8.2.2 on page 60. This is the more secure method, since one device can authenticate the other. 8.2.1 Push Button Configuration (PBC) 1 Make sure that your NBG2105 is turned on and working as an AP or wireless router. Make sure that the device is placed within range of your notebook. 2 Make sure that you have installed the wireless client (this example uses the NWD210N) driver and utility in your notebook. 3 In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or WPS button) 4 Log into NBG2105's Web Configurator and press the Start PBC button in the Wireless LAN > WPS screen. NBG2105 User's Guide 59