ZyXEL NBG2105 User Guide - Page 95
WPS Screen
View all ZyXEL NBG2105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Figure 58 Wireless LAN > Site Survey: WPA2-PSK Chapter 13 Wireless LAN The following table describes the labels in this screen. Table 47 Wireless LAN > Site Survey: WPA-PSK or WPA2-PSK LABEL DESCRIPTION Encryption Select WPA-PSK or WPA2-PSK to associate with the selected AP using WPA-PSK or WPA2-PSK. Authentication Mode Personal (Pre-Shared Key) is selected to use a simple common password for authentication. WPA Cipher Suite Select TKIP and/or AES to configure which encryption options the NBG2105 uses to connect to the selected access point. This appears when WPA encryption is selected. WPA2 Cipher Suite Select TKIP and/or AES to configure which encryption options the NBG2105 uses to connect to the selected access point. This appears when WPA2 encryption is selected. Pre-Shared Key Format Select Passphrase to make the NBG2105 generate a key from a phrase typed into the Pre-Shared Key field. Pre-Shared Key Select HEX to configure the NBG2105 to accept a key in hexadecimal format in the Pre-Shared Key field. If Passphrase was selected in the Pre-Shared Key Format field, type a pre-shared key from 8 to 63 case-sensitive keyboard characters. Back Connect If HEX was selected in the Pre-Shared Key Format field, type a pre-shared key using hexadecimal characters ("0-9", "A-F"). Click this to go back to the initial site survey screen. Click this to associate the NBG2105 with the selected access point. 13.8 WPS Screen Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS status. To open this screen, click Wireless LAN > WPS. The screen varies depending on the operation mode in which the NBG2105 is working. NBG2105 User's Guide 95