Brother International MFC 8500 Service Manual - Page 115
key is inoperable during standby for redialing and timer., The LCD clears the current display.
UPC - 012502603832
View all Brother International MFC 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
IMPORTANT Basically, the maintenance-mode functions listed on the previous page should be accessed by service personnel only. However, you may allow end users to access some of these under the guidance of service personnel (e.g., by telephone). The user-accessible functions (codes 10, 11, 12, 54, 80, 82, 87 and 91) are shaded in the table given on the previous page. Function code 10 accesses the firmware switches, each of which has eight selectors. You should not allow end users to access all of those selectors, but you may allow them to access user-accessible selectors which are shaded in the firmware switch tables in Appendix 2. The service personnel should instruct end users to follow the procedure given below. (1) Press the Menu and Mode keys in this order. The LCD clears the current display. NOTE: The Mode key is inoperable during standby for redialing and timer. (2) Press the 0 key. (3) Enter the desired function code (10, 11, 12, 54, 80, 82, 87, or 91) with the numerical keys. For function code 10, access the desired firmware switch according to the operating procedure described in Appendix 2. (4) To make the equipment return to the standby state, press the Stop key. Menu key Mode key 0 key Stop key V - 3