Brother International MFC 8500 Service Manual - Page 98
until it snaps into place as shown below., Before reinstalling the high-voltage power supply PCB
UPC - 012502603832
View all Brother International MFC 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
(6) For models available with a 2nd paper cassette: Pull the 2nd cassette relay PCB bracket to take out its harness. Remove the screw and take off the 2nd cassette relay PCB from its bracket. Reassembling Notes • Before reinstalling the high-voltage power supply PCB, push in the spring with a flat screwdriver until it snaps into place as shown below. • Before reinstalling the high-voltage power supply PCB, check the high-voltage contacts for any toner particles, paper dust or dirt, and clean them out. IV - 57
IV
- 57
(6)
For models available with a 2nd paper cassette:
Pull the 2nd cassette relay PCB bracket to
take out its harness.
Remove the screw and take off the 2nd cassette relay PCB from its
bracket.
±
Reassembling Notes
•
Before reinstalling the high-voltage power supply PCB, push in the spring with a flat screwdriver
until it snaps into place as shown below.
•
Before reinstalling the high-voltage power supply PCB, check the high-voltage contacts for any
toner particles, paper dust or dirt, and clean them out.