D-Link DGS-3120-24TC Product Manual - Page 116

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Multicast Address List Enter the multicast address list value. Click the Add button to add a new entry based on the information entered. Click the Multicast VLAN > IGMP Snooping Multicast Group VLAN Settings, as show below: Figure 4-67 IGMP Snooping Multicast VLAN Settings window The fields that can be configured are described below: Parameter Description IGMP Multicast VLAN State Click the radio buttons to enable or disable the IGMP Multicast VLAN state. IGMP Multicast VLAN Forward Click the radio buttons to enable or disable the IGMP Multicast VLAN Forwarding state. VLAN Name Enter the VLAN Name used. VID Enter the VID used. Remap Priority 0-7 - The remap priority value (0 to 7) to be associated with the data traffic to be forwarded on the multicast VLAN. None - If None is specified, the packet's original priority is used. The default setting is None. Replace Priority Specify that the packet's priority will be changed by the switch, based on the remap priority. This flag will only take effect when the remap priority is set. Click the Apply button to accept the changes made for each individual section. Click the Add button to add a new entry based on the information entered. Click the Edit button to configure the IGMP Snooping Multicast VLAN Settings for the specific entry. Click the Delete button to remove the specific entry. Click the Profile List link to configure the IGMP Snooping Multicast VLAN Settings for the specific entry. After clicking the Edit button, the following page will appear: 108