D-Link DGS-3120-24TC Product Manual - Page 285

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Figure 10-17 Ethernet OAM Settings window The fields that can be configured are described below: Parameter Description Unit Select the unit you want to configure. From Port / To Port Select a range of ports you wish to configure. Mode Use the drop-down menu to select to operate in either Active or Passive. The default mode is Active. State Use the drop-down menu to enable or disable the OAM function. Remote Loopback Use the drop-down menu to select Ethernet OAM remote loopback. None - Select to disable the remote loopback. Start - Select to request the peer to change to the remote loopback mode. Stop - Select to request the peer to change to the normal operation mode. Received Remote Loopback Use the drop-down menu to configure the client to process or to ignore the received Ethernet OAM remote loopback command. Process - Select to process the received Ethernet OAM remote loopback command. Ignore - Select to ignore the received Ethernet OAM remote loopback command. Click the Apply button to accept the changes made for each individual section. Ethernet OAM Configuration Settings This window is used to configure Ethernet OAM configuration settings. To view this window, click OAM > Ethernet OAM > Ethernet OAM Configuration Settings, as shown below: 277