D-Link DGS-3120-24TC Product Manual - Page 45
Single IP Settings, Topology, Management > Single IP Management > Single IP Settings
View all D-Link DGS-3120-24TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
xStack® DGS-3120 Series Managed Switch Web UI Reference Guide c. Log - The Switch now supports uploading MS log files to a TFTP server. 4. The user may zoom in and zoom out when utilizing the topology window to get a better, more defined view of the configurations. Single IP Settings The Switch is set as a Candidate (CaS) as the factory default configuration and Single IP Management is disabled. To view the following window, click Management > Single IP Management > Single IP Settings, as show below: Figure 3-16 Single IP Settings window The fields that can be configured are described below: Parameter Description SIM State Use the pull-down menu to either enable or disable the SIM state on the Switch. Disabled will render all SIM functions on the Switch inoperable. Role State Use the pull-down menu to change the SIM role of the Switch. The two choices are: Candidate - A Candidate Switch (CaS) is not the member of a SIM group but is connected to a Commander Switch. This is the default setting for the SIM role of the Switch. Commander - Choosing this parameter will make the Switch a Commander Switch (CS). The user may join other switches to this Switch, over Ethernet, to be part of its SIM group. Choosing this option will also enable the Switch to be configured for SIM. Group Name Enter a Group Name in this textbox. This is optional. This name is used to segment switches into different SIM groups. Discovery Interval (30-90) The user may set the discovery protocol interval, in seconds that the Switch will send out discovery packets. Returning information to a Commander Switch will include information about other switches connected to it. (Ex. MS, CaS). The user may set the Discovery Interval from 30 to 90 seconds. The default value is 30 seconds. Hold Time Count (100-255) This parameter may be set for the time, in seconds; the Switch will hold information sent to it from other switches, utilizing the Discovery Interval. The user may set the hold time from 100 to 255 seconds. The default value is 100 seconds. Click the Apply button to accept the changes made. After enabling the Switch to be a Commander Switch (CS), the Single IP Management folder will then contain four added links to aid the user in configuring SIM through the web, including Topology, Firmware Upgrade, Configuration Backup/Restore and Upload Log File. Topology This window will be used to configure and manage the Switch within the SIM group and requires Java script to function properly on your computer. The Java Runtime Environment on your server should initiate and lead you to the Topology window, as seen below. 37