D-Link DGS-3120-24TC Product Manual - Page 132

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide LLDP Port Settings On this page the user can configure the LLDP port parameters. To view the following window, click L2 Features > LLDP > LLDP Port Settings, as show below: Figure 4-86 LLDP Port Settings window The fields that can be configured are described below: Parameter Description Unit Select the starting and ending ports to use. From Port / To Port Use the drop-down menu to select the ports used for this configuration. Notification Use the pull-down menu to enable or disable the status of the LLDP notification. This function controls the SNMP trap however it cannot implement traps on SNMP when the notification is disabled. Admin Status This function controls the local LLDP agent and allows it to send and receive LLDP frames on the ports. This option contains TX, RX, TX And RX or Disabled. TX: the local LLDP agent can only transmit LLDP frames. RX: the local LLDP agent can only receive LLDP frames. TX And RX: the local LLDP agent can both transmit and receive LLDP frames. Disabled: the local LLDP agent can neither transmit nor receive LLDP frames. The default value is TX And RX. Subtype Use the drop-down menu to select the type of the IP address information will be sent. Action Use the drop-down menu to enable or disable the action field. Address Enter the IP address that will be sent. Click the Apply button to accept the changes made. 124