D-Link DGS-3120-24TC Product Manual - Page 282

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Figure 10-13 CFM Linktrace Settings Window The fields that can be configured are described below: Parameter Description MEP Name Select and enter the Maintenance End Point name used. MEP ID Select and enter the Maintenance End Point ID used. MD Name Select and enter the Maintenance Domain name used. MD Index Select and enter the Maintenance Domain index used. MA Name Select and enter the Maintenance Association name used. MA Index Select and enter the Maintenance Association index used. MAC Address Here the user can enter the destination MAC address. TTL Link-trace message TTL value. The default value is 64. PDU Priority The 802.1p priority to be set in the transmitted LTM. If not specified, it uses the same priority as CCMs sent by the MA. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to remove the specific entry based on the information entered. Click the Delete All button to remove all the entries listed. CFM Packet Counter To view this window, click OAM > CFM > CFM Packet Counter, as shown below: 274