D-Link DGS-3120-24TC Product Manual - Page 172

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Figure 7-21 Add Access Rule (Packet Content ACL) The fields that can be configured are described below: Parameter Description Access ID (1-256) Action Priority (0-7) Replace Priority Replace DSCP (0-63) Type in a unique identifier number for this access. This value can be set from 1 to 256. Auto Assign - Ticking this check box will instruct the Switch to automatically assign an Access ID for the rule being created. Select Permit to specify that the packets that match the access profile are forwarded by the Switch, according to any additional rule added (see below). Select Deny to specify that the packets that match the access profile are not forwarded by the Switch and will be filtered. Select Mirror to specify that packets that match the access profile are mirrored to a port defined in the config mirror port command. Port Mirroring must be enabled and a target port must be set. Tick the corresponding check box if you want to re-write the 802.1p default priority of a packet to the value entered in the Priority field, which meets the criteria specified previously in this command, before forwarding it on to the specified CoS queue. Otherwise, a packet will have its incoming 802.1p user priority re-written to its original value before being forwarded by the Switch. For more information on priority queues, CoS queues and mapping for 802.1p, see the QoS section of this manual. Tick this check box to replace the Priority value in the adjacent field. Select this option to instruct the Switch to replace the DSCP value (in a packet that meets the selected criteria) with the value entered in the adjacent field. When an ACL rule is added to change both the priority and DSCP of an IPv4 packet, only one of them can be modified due to a chip limitation. Currently the priority is changed when both the priority and DSCP are set to be modified. 164