D-Link DGS-3120-24TC Product Manual - Page 265
DHCP Relay VLAN Settings (SI Mode Only), DHCP Relay Option 60 Server Settings
View all D-Link DGS-3120-24TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Figure 9-4 DHCP Relay Interface Settings window The fields that can be configured are described below: Parameter Description Interface Name The IP interface on the Switch that will be connected directly to the Server. Server IP Address Enter the IP address of the DHCP server. Up to four server IPs can be configured per IP Interface. Click the Apply button to accept the changes made. DHCP Relay VLAN Settings (SI Mode Only) This page allows the user to configure an IP address as a destination to forward (relay) DHCP/BOOTP packets. If there is an IP interface in the VLAN and it has configured a DHCP server at the interface level, then the configuration at the interface level has higher priority. In this case, the DHCP server configured on the VLAN will not be used to forward the DHCP packets. To view this window, click Network Application > DHCP > DHCP Relay > DHCP Relay VLAN Settings as shown below: Figure 9-5 DHCP Relay VLAN Settings window The fields that can be configured are described below: Parameter Description VID List Enter the VLAN ID list used for this configuration here. Server IP Address Enter the DHCP/BOOTP server IP address used here. Click the Add button to add an entry. Click the Delete button to remove an entry. DHCP Relay Option 60 Server Settings On this page the user can configure the DHCP relay option 60 server parameters. To view this window, click Network Application > DHCP > DHCP Relay > DHCP Relay Option 60 Server Settings as shown below: 257