D-Link DGS-3120-24TC Product Manual - Page 295

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Figure 11-7 RX Packets Analysis window (table for Unicast, Multicast, and Broadcast Packets) The fields that can be configured are described below: Parameter Description Unit Select the unit you want to configure. Port Use the drop-down menu to choose the port that will display statistics. Time Interval Select the desired setting between 1s and 60s, where "s" stands for seconds. The default value is one second. Record Number Select number of times the Switch will be polled between 20 and 200. The default value is 200. Unicast Counts the total number of good packets that were received by a unicast address. Multicast Counts the total number of good packets that were received by a multicast address. Broadcast Counts the total number of good packets that were received by a broadcast address. Show/Hide Check whether or not to display Multicast, Broadcast, and Unicast Packets. Click the Apply button to accept the changes made for each individual section. Click the Clear button to clear all statistics counters on this window. Click the View Table link to display the information in a table rather than a line graph. Click the View Graphic link to display the information in a line graph rather than a table. Transmitted (TX) To select a port to view these statistics for, select the port by using the Port pull-down menu. The user may also use the real-time graphic of the Switch at the top of the web page by simply clicking on a port. To view this window, click Monitoring > Statistics > Port Statistics > Packets > Transmitted (TX) as shown below: 287