D-Link DGS-3120-24TC Product Manual - Page 264

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide The Implementation of DHCP Relay Agent Information Option 82 The DHCP Relay Option 82 command configures the DHCP relay agent information option 82 setting of the Switch. The formats for the circuit ID sub-option and the remote ID sub-option are as follows: NOTE: For the circuit ID sub-option of a standalone switch, the module field is always zero. Circuit ID sub-option format: Figure 9-2 Circuit ID Sub-option Format 1 Sub-option type 2 Length 3 Circuit ID type 4 Length 5 VLAN: The incoming VLAN ID of DHCP client packet. 6 Module: For a standalone switch, the Module is always 0; for a stackable switch, the Module is the Unit ID. 7 Port: The incoming port number of the DHCP client packet, the port number starts from 1. Remote ID sub-option format: Figure 9-3 Remote ID Sub-option Format 1 Sub-option type 2 Length 3 Remote ID type 4 Length 5 MAC address: The Switch's system MAC address. DHCP Relay Interface Settings Users can set up a server, by IP address, for relaying DHCP information to the Switch. The user may enter a previously configured IP interface on the Switch that will be connected directly to the DHCP server using this window. Properly configured settings will be displayed in the DHCP Relay Interface Table at the bottom of the window, once the user clicks the Apply button. The user may add up to four server IPs per IP interface on the Switch. Entries may be deleted by clicking the corresponding Delete button. To view this window, click Network Application > DHCP > DHCP Relay > DHCP Relay Interface Settings as shown below: 256